CostaLab Sweeping instrument cable

alkaen 55,00 €

Toimitusaika: 3-5 päivä(ä)

Kuvaus

The CostaLab Sweeping cables were designed to give the best signal reproductions for guitar and bass instruments.Some of the benefits are full harmonics and frequency reproduction with clear mids, bass, and crystal clear high frequencies.

Thanks to its very high quality components and the materials used, the signal loss was reduced to a minimal (almost non existent).  This gives you increased output level in all of the frequencies spectrum as well as the overall volume output.    

Special connectors were used with a copper core that connects directly to the welding points of each end of the jack. Using the best copper wire available, the transfer of the signal is superior compared to the common instrument cables with much lower copper contents in the wire

As you know copper is one of the best metals used for signal transmission. For superior connectivity, all the solder connections are made with alloy composed of 2% of silver.

The robust construction materials guarantee reliability and durability of the cables. Each cable is encased in a special braided cotton casing keeping the core protected and at the same time making it very flexible. The connectors are covered by a transparent sheath which allows you to inspect the state of the terminations.

The cable is designed to operate in a uni-directional way. The side to be connected to the instrument is marked "Instrument". The connection type is semi-balanced which eliminates electromagnetic disturbances.

CostaLab hi definition cables can be used with confidence whether in studio or on stage.

Technical features

  • Total lengt: 3m or 5m
  • Connectors: straight - straight (instrument), straight - angled (instrument), angelo - straight (instrument)
  • Conductor: Bare copper strand 0.15mm each
  • Cross section: 0.5mm2
  • Shielding: Double rotating copper spiral shield
  • Internal Insulation: PE
  • External Insulation: PVC
  • external protection: Cotton sheath
  • Overall diameter: 7 mm2
  • Minimum bending radius: 36mm
  • Working temperature: -20°C/+70°C

 

Standard lengths available with straight or angled terminations, with no difference in price.
Custom lengths available on request with extra cost.
(images for illustrative purposes)

Palaa kohteeseen Etusivu