Carl Martin Single Channel AC-Tone

The new `single channel` AC-Tone, is a smaller pedal-board friendly, single channel version of the original Pro-Series AC-Tone. It features 3 knobs and 1 switch and has a slightly beefed up Gain section, but shares the very same tone as its big sister!
The single AC-Tone also incorporates our new DC-DC converter circuitry, so the pedal can be powered by a regulated 9V Power Supply but will still operate on the same +-12V level as the original AC powered AC-Tone. This allows us to use the same high quality components which provide the same tone and headroom that make the CM Pro-Series pedals stand out from the rest!

Our Bypass switch button; which switches the AC-Tone on or off, is active buffered output so you don’t loose any signal in long cables a cross stage!

• Power Requirements Battery: The AC-Tone does not accept the use of battery, only external power supply.
• Power consumption: max. 62 mA
• Power supply: 9 V DC (regulated), 100 mA minimum, 2.1 mm female plug, center negative (-) ATTENTION: Please Use DC Power Supply Only! Failure to do so may damage the unit and void the warranty.

Specifications

• Input……………………….......... 1M Ohm
• Output……………….................. 200 Ohm
• S/N Ratio................................... 58 dB
• Dimensions .............................. 112 (W) x 72 (D) x 57 (H) mm 4.40” (W) x 2,83” (D) x 2.24” (H) Weight....................................... 280g/ 0.62lbs