Carl Martin Single Channel PlexiTone
Tuotenumero: CM-SC-PLT
Kuvaus
The new `single channel` Carl Martin PlexiTone was designed in association with Pete Thorn, and is housed in a small pedal-board friendly housing with 3 knobs and 1 switch. Apart from Pete’s slight modifications that give this new pedal a tighter bottom-end and slightly softer high frequencies, it is exactly the same gain structure as the High Gain setting on the original Pro-Series PlexiTone….it just plays better with different amps.
The single Plexi also incorporates our new DC-DC converter circuitry, so the pedal can be powered by a regulated 9V Power Supply but will still operate on the same +-12V level as the original AC powered PlexiTone. This allows us to use the same high quality components which provide the same tone and headroom that make the CM Pro-Series stand out from the rest!
Our Bypass switch button; which switches the PlexiTone on or off, is active buffered output so you don’t loose any signal in long cables a cross stage!
Power Requirements
- Battery: The PlexiTone does not accept the use of battery, only external power supply.
- Power consumption: max. 62 mA
- Power supply: 9 V DC (regulated), 100 mA minimum, 2.1 mm female plug, center negative (-) ATTENTION: Please Use DC Power Supply Only! Failure to do so may damage the unit and void the warranty.
Specifications
- Input……………………….......... 1M Ohm
- Output……………….................. 200 Ohm
- S/N Ratio................................... 54 dB
- Dimensions .............................. 112 (W) x 72 (D) x 57 (H) mm 4.40” (W) x 2,83” (D) x 2.24” (H) Weight....................................... 280g/ 0.62lbs